How to Spool a Spinning Reel by Yourself: Step-by-Step Guide

When casting, the reel is as important as the fishing rod. Whether you choose braid or nylon, it is essential to follow the proper steps to fill your reel correctly is essential. Whether it's a new reel or changing a worn spool, do not rush this operation if you want to avoid bags of knots at the water's edge!

Filling the reel spool is an important step that should not be overlooked before heading to the water's edge. That's why as a beginning angler, you have to know how to spool a spinning reel. A poorly filled reel may decrease casting distance and increase the risk of line knots. Proper spooling of your spinning reel can help limit line twisting and associated problems by the waterside.

Can You Spool a Spinning Reel by Yourself?

Yes, why not! You only need to know the basics of the spinning reel – the parts, the types, and the functions of each component, how to choose the right lines, and then how to spool a spinning reel without a line twist. Meanwhile, to spool the spinning reel yourself, you may want to have a reel spooler that makes the line easier to spool. For example, the Piscifun Speed X is a fishing line spooler that makes this easy, thanks to its unwinding function.

How to Choose a Line

Unlike bait casting reels, spinning reels are designed for lighter lines and bait. As a result, not all fishing line options will work well under these constraints.

This capacity indicates the line weight your reel can withstand and the line length or how much fishing line your reel can hold. So, make sure your line matches the capacity of your reel.

How to Spool Line onto a Spinning Reel Step by Step

Putting the line in the reel helps avoid all those twists that would lead to the formation of knots. It is, therefore, important that the side of the spool is facing upwards so that the line comes out in the same direction in which it was spooled into the spool. Next, we'll see how a spinning reel is properly spooled.

To load and fill your reels, follow these steps:

Step 1: Mount your reel on your rod

Equip your rod with your reel. Fit the reel in the dedicated location on your rod and tighten well so that it is stable.

Step 2: Take a basin and fill it with water

Take a basin and fill it with water. Put your thread spool in and let it soak for a few minutes. Using water will allow the nylon and/or braid to soften. This will also allow the nylon spool to unwind more easily when filling your reel. It will also save you from chasing the reel.

Step 3: Hook your line to your reel through the guide

Take the end of your nylon and pass it through the starting ring (bottom of your rod). This will allow you to tauten your line and ensure a correct first fill.

Then make a loop with a double knot or arbor knot and pass the rest of your yarn through this loop. Thus, you will have something very solid, especially if you get to the last meters of your reel when fishing long distances.

Using a yarn or elastic as a base is an excellent trick to fill these reels well.

Step 4: Start Filling Your Reels

Start filling your reels by cranking the lever on the reel, maintaining constant tension with your second hand. Start slowly at first and then speed up, keeping the same pace thereafter. Take breaks from time to time to "spread" your yarn with your fingers. Then continue to fill your reels.

Step 5: Stop Filling

One of the common mistakes beginners make is wanting to fill their fishing reels to the edge. But it's the best way to lose a fish. Therefore, we highly recommend that you respect the indications provided on the spools of your carp reel. Ex: 250 meters in 30 hundredths. You will thus have a well-balanced reel that will not parakeet during strong casts or somewhat tough fights. Remember to change the content of your reels at the slightest sign of weakness.

In the video below, you’ll find some handy tips on spooling a spinning reel.

Tips for Beginners

When you are about to mount your new line (line or braid) on your reel, and get it wrong, then be prepared to run into several problems. Among these are indeed the knots on the braid and other minor problems such as spirals and buttonholes. It is therefore essential to dedicate some time to carry out the operation calmly and patiently.

How to Spool a Spinning Reel Without Line Twist

Always wind the thread by putting a little pressure on it. The result will be a hard and compactly spooled reel. If the line isn't tight when putting it on the reel, the risk of twisting is high. Another trick is to wet the reel during loading.

If you have chosen a simple Nylon monofilament such as the Berkley Trilene XL for your reel, then pay attention to the fishing line memory. By memory, we mean the phenomenon of preserving the shape (the turns) of the spool even when the thread comes out of the spool.

Try unwinding a few meters, reshaping it by applying a little traction. Look at how it behaves: have the coils stretched without problems, or does the shape remain?

If, after ironing the nylon several times, you still have the shape of the spool, then you have a line with a lot of memory in your hand! In this case, wind it into the reel in the same direction as the spool. This little trick will save you snarls, tangles, and other hassles while fishing.

How to Spool Braided Line on Spinning Reel

If you have chosen to spool braid for your reel, the best trick to save the starting meters is to spool nylon into the bottom meters of your reel. Generally, a 0.27 or a 0.30 are fine for those practicing medium-light spinning.

This will allow you to save precious "braid" and optimize it over time.

We recommend first putting a layer of electrical tape on your “bare” part of the coil. If you don't like electrical tape because it can release glue in the heat, you can also use paper tape.

At this point, take your 0.30 nylon monofilament and tie a nice knot in the spool. The most used is the so-called "Arbor knot."

Once you have performed the arbor knot on your spool, with your finger, press lightly on the line to be spooled and start winding with the crank of your reel.

Spinning Reel Basics

Fishing reels are part of the basic equipment of every angler. These reels are comparatively light and optimized for braided lines. They are available in different sizes, whereby the reel size should suit the rod, the fishing water, the line requirement, the bait weight, and the fighting strength of the fish.

Spinning Reel Parts

If you want to get the most from your spinning reel and handle it properly, you need to know its construction. Below are the parts of a spinning reel.

  1. The body: flanges and the frame

A spinning reel comprises a frame that generally closes the spool and some gears. On the sides of this frame are fixed two flanges, removable by pivoting or unscrewing. They often contain part of the mechanism.

  1. The bail

The bail refers to a semicircular wire section attached to a hinged joint. It is rotated forward to release the fishing line when casting. And as the handle rotates to retrieve the fishing line, the bail automatically flips back to the original position.

  1. Line Spool

The line spool holds the fishing line. They are often made of graphite and anodized aluminum. The spool spins on the shaft via the gears when the line is retrieved and spins freely while casting.

  1. The Crank

Straight, angled, in carbon, there are two on reels of standard size. Meanwhile, only one is found on reels for heavy fishing.

  1. The Clutch Pedal

This is a small lever fixed on the part of the frame in contact with the thumb. It will disengage the reel, whose spool will then turn freely. It reengages by giving a crank stroke.

  1. The Anti-reverse Brake or Friction Brake

It is the small wheel located near the crank and is used to slow down the reel by friction to prevent it from reversing. Generally, this brake is adjusted for each lure, checking that the disengaged reel turns well but stops as soon as the lure touches the ground or water.

  1. The Centrifugal or Magnetic Brake

This is a more complex brake that will influence the speed of rotation of the reel. It's useful for fishing against the wind or when twists appear.

  1. The Wire Guide

This is the ring through which your thread or your braid passes. It's mobile on a fixed axis. It arranges the thread over the entire spool.

When to Use a Spinning Reel

A spinning reel is a fishing reel designed for spin fishing. They're a good choice when you want to fish in shallow water or need a reel that can handle light lines. Spinning reels are suitable for beginners and experienced anglers alike. However, if you want more control over your fishing experience than is possible with a reel, then a spinning reel is worth considering.

Final Thoughts

Without the fishing reel, the tug of war between man and fish would be almost impossible. So whether stationary or multiplier, knowing how to spool a fishing reel is essential. But first, the reel and line must match the type of fishing and the target fish.

In any case, the spinning reels are easy to master and great for light baits. Despite these advantages, however, any spinning reel can be rendered useless if the fishing line is not spooled correctly from the start.

Knowing how to spool a spinning reel can help avoid line twists, snags, and other problems. So, use the tips and instructions provided in this article on your next fishing adventure.


Scroll to top